Welcome to D&D Farm Supply's online website and store.
Extra Heavy Duty Elevator
Product Description
Call for pricing!
Complete Elevator Units available:
18', 24', 30', 36', 42', 48', 54', 60', 66', 72', & 78' (6' drive & 12' idler sections, electric motor & pulley not included)
84', 90', & 96' (8' drive & 8' idler section, electric motor & pulley not included)
102', 108', 114', & 120' (8' drive & 8' idler section with drive unit, motor mount and belt, & chain included)
High-strength 1" square tubing — 70% more flexural strength than comparable round tubing
Heavier design — use as inclined conveyor, mow conveyor or both
Thicker-walled 15 ga. steel construction
'Bridge Truss' side reinforcements along full length of elevator prevent sagging, bowing, twisting, and bending. Inclined elevators are self supporting up to 54
Higher side rails allow bales to sit down deep in elevator (preventing irregular shaped bales from tumbling out)
Extra heavy-duty No.62 conveyor chain equipped with raised links every 24" for more positive movement
Bronze, pillow-block bearings on drive unit — self-aligning with grease zerks
Full 1" solid head and jack shafts
Permanently-lubricated, sealed ball-bearing idler sprockets
Stronger No. 40 roller-chain final drive
All electrically wire-welded construction — welds go all the way around seams for added strength
Sturdy, universal motor mount for electric motor is adjustable for leveling, belt take-up and "stop and go" operation. Mount is quickly detachable for inside storage of motor (drive belt included)
Powder-coated bright-red finish... for longer life
Complete Elevator Units available:
18', 24', 30', 36', 42', 48', 54', 60', 66', 72', & 78' (6' drive & 12' idler sections, electric motor & pulley not included)
84', 90', & 96' (8' drive & 8' idler section, electric motor & pulley not included)
102', 108', 114', & 120' (8' drive & 8' idler section with drive unit, motor mount and belt, & chain included)
High-strength 1" square tubing — 70% more flexural strength than comparable round tubing
Heavier design — use as inclined conveyor, mow conveyor or both
Thicker-walled 15 ga. steel construction
'Bridge Truss' side reinforcements along full length of elevator prevent sagging, bowing, twisting, and bending. Inclined elevators are self supporting up to 54
Higher side rails allow bales to sit down deep in elevator (preventing irregular shaped bales from tumbling out)
Extra heavy-duty No.62 conveyor chain equipped with raised links every 24" for more positive movement
Bronze, pillow-block bearings on drive unit — self-aligning with grease zerks
Full 1" solid head and jack shafts
Permanently-lubricated, sealed ball-bearing idler sprockets
Stronger No. 40 roller-chain final drive
All electrically wire-welded construction — welds go all the way around seams for added strength
Sturdy, universal motor mount for electric motor is adjustable for leveling, belt take-up and "stop and go" operation. Mount is quickly detachable for inside storage of motor (drive belt included)
Powder-coated bright-red finish... for longer life